Calcium with Arsenazo III (1,8-Dihydroxy-3,6-disulpho-2,7-naphthalene-bis
(azo)-dibenzenearsonic acid), at neutral pH, yields a blue colored complex.
The intensity of the colour formed is proportional to the calcium
concentration in the sample1,2,3
PRINCIPLE OF THE METHOD
Calcium with Arsenazo III (1,8-Dihydroxy-3,6-disulpho-2,7-naphthalene-bis
(azo)-dibenzenearsonic acid), at neutral pH, yields a blue colored complex.
The intensity of the colour formed is proportional to the calcium
concentration in the sample1,2,3
.
CLINICAL SIGNIFICANCE
Calcium is the most abundant and one of the most important minerals in the
human body. Approximately 99% of body calcium is found in bones.
A decrease in albumin level causes a decrease in serum calcium. Low levels
of calcium are found in hypoparathyroidism, pseudohypoparathyroidism,
vitamin D deficiency, malnutrition and intestinal malabsortion.
Among causes of hypercalcemia are cancers, large intake of vitamin D,
enhaced renal retention, osteoporosis, sarcosidosis, thyrotoxicosis,
hyperparathyroidism1,6,7
.
Clinical diagnosis should not be made on a single test result; it should
integrate clinical and other laboratory data.
REAGENTS
R
Arsenazo III
Imidazol Buffer pH 6,5
Arsenazo III
100 mmol/L
120 mmol/L
PRECAUTIONS
R: H360- May damage fertility or the unborn child.
Follow the precautionary statements given in MSDS and label of the
product.
PREPARATION
The reagent is ready to use.
STORAGE AND STABILITY
All the components of the kit are stable until the expiration date on the label
when stored tightly closed at 2-8ºC, protected from light and contaminations
are prevented during their use.
Do not use reagents over the expiration date.
Signs of reagent deterioration:
- Presence of particles and turbidity.
- Blank absorbance (A) at 660 nm
0,50.
ADDITIONAL EQUIPMENT
- MINDRAY BS-120 / BS-200E Autoanalyzer.
- General laboratory equipment (Note 1, 2)
.
SAMPLES
- Serum or plasma1
: Separated from cells as rapidly as possible. Blood
anticoagulants with oxalate or EDTA are not acceptable since these
chemicals will strongly chelate calcium.
- Urine1
: Collect 24 hour urine specimen in calcium free containers. The
collecting bottles should contain 10 ml of diluted Nitric acid (50% v/v).
Record the volume.
Dilute a sample 1/2 in distilled water. Mix. Multiply results by 2 (dilution
factor).
Stability of the samples: Calcium is stable 10 days at 2-8ºC.
PRINCIPLE OF THE METHOD
Calcium with Arsenazo III (1,8-Dihydroxy-3,6-disulpho-2,7-naphthalene-bis
(azo)-dibenzenearsonic acid), at neutral pH, yields a blue colored complex.
The intensity of the colour formed is proportional to the calcium
concentration in the sample1,2,3
.
CLINICAL SIGNIFICANCE
Calcium is the most abundant and one of the most important minerals in the
human body. Approximately 99% of body calcium is found in bones.
A decrease in albumin level causes a decrease in serum calcium. Low levels
of calcium are found in hypoparathyroidism, pseudohypoparathyroidism,
vitamin D deficiency, malnutrition and intestinal malabsortion.
Among causes of hypercalcemia are cancers, large intake of vitamin D,
enhaced renal retention, osteoporosis, sarcosidosis, thyrotoxicosis,
hyperparathyroidism1,6,7
.
Clinical diagnosis should not be made on a single test result; it should
integrate clinical and other laboratory data.
REAGENTS
R
Arsenazo III
Imidazol Buffer pH 6,5
Arsenazo III
100 mmol/L
120 mmol/L
PRECAUTIONS
R: H360- May damage fertility or the unborn child.
Follow the precautionary statements given in MSDS and label of the
product.
PREPARATION
The reagent is ready to use.
STORAGE AND STABILITY
All the components of the kit are stable until the expiration date on the label
when stored tightly closed at 2-8ºC, protected from light and contaminations
are prevented during their use.
Do not use reagents over the expiration date.
Signs of reagent deterioration:
- Presence of particles and turbidity.
- Blank absorbance (A) at 660 nm
0,50.
ADDITIONAL EQUIPMENT
- MINDRAY BS-120 / BS-200E Autoanalyzer.
- General laboratory equipment (Note 1, 2)
.
SAMPLES
- Serum or plasma1
: Separated from cells as rapidly as possible. Blood
anticoagulants with oxalate or EDTA are not acceptable since these
chemicals will strongly chelate calcium.
- Urine1
: Collect 24 hour urine specimen in calcium free containers. The
collecting bottles should contain 10 ml of diluted Nitric acid (50% v/v).
Record the volume.
Dilute a sample 1/2 in distilled water. Mix. Multiply results by 2 (dilution
factor).
Stability of the samples: Calcium is stable 10 days at 2-8ºC.
