- Servo Control Mode: air temperature.
- Parameter Displaying: set temperature,air temperature, heat power rate.
- Audible & Visual Alams: power failure, sensor failure higher & lower temp, air temperature
override,fan failure, system failure.
-(37⁰C) Preset Mode: power failure reset memory, alarm silence keypad lock, self-testfunction.
- Hood with dual slope: 6 hand-ports.
- RS-232 Output Connector (use for networksystem).
-Protective guard rail.
-IV poles.
-Storage cabinets.
Specifications of hood:
Mattress to Hood:450 mm
Observation side of hood: Two incline
Operate port: 6 (2 Iris ports)
Tubing grommets: 4
Front access panel: 826x310 mm
Mattress Tray Size: 630x360 mm
Infant bed tilt adjustable: ±10 step-less
Technical Specifications:
Power requirement: ≤400VA
Temperature control mode: Air servo control Air
Temp Control Range: 20.0°C-37.0°C
Temperature override mode to: 37.1°C-39.0⁰C
Temperature fluctuation: ≤0.5°C
Mattress temperature uniformity: ≤0.8°C
Temperature rise time: ≤45 min
Noise level within hood environment: ≤55dB
Alarms
Power failure alarm Fan failure alarm
Sensor falure alarm High air temperature alarm: +3.0°C
Low air temperature alarm: -3.0°C
Over air temperature alar:≤ 38.0 °C, ≤40.0°C
System failure alarm
Alarm silence function
Operational condition:
Environment temperature: +20'C-+30C
Environment relative humidity: 30% C-75%
Environment air velocity of flow: 0.3m/s
Others
Mattress tray Max load 5kg
Transfusion pole Max. load 2kg
Cabinet Max. load 6k
