LYS-3
Lyse reagent for Spincell 3
IVD
INTENDED USE
This product is designed to be used on a Spinreact 3-Part-Diff
haematology analyser along with the Diluent reagent produced by
SPINREACT, for testing the cell content in human blood.
FUNCTIONS
Lytic reagent lyses the RBC releasing the hemoglobin and avoiding
RBC interference on the WBC counting. Meanwhile it converts
hemoglobin to be a steady colored hemo-compound allowing the
measuring of hemoglobin concentration.
The Lytic Reagent preserves the integrity of the white cell for its
accurate identification.
INGREDIENTS
Chloride, sulfate, preservative solution, anticoagulant, buffer solution
and quaternium.
STORAGE & STABILITY
This product will be stable for 24 months when stored unopened at
2℃~40℃ and away from sunlight. Once opened, this product should
be consumed within 60 days and stored below 35℃
BLOOD SAMPLES
1. The blood samples should be venous and capillary
specimens collected in EDTA-K2 anticoagulant. Coagulated,
hemolysis and lipoidaemia samples cannot be measured.
2. Blood samples should be stored at 2℃~8℃.
OPERATIONAL PROCEDURE
1. Connect the lysing reagent to the tubing interface which is
marked “LYSE” on the rear panel of the instrument.
2. Instrument adds diluent and lytic reagent automatically
when measuring blood samples.
3. Measurement results can be printed out by using an outer
printer or the inner thermal printer.
Read the instrument’s user manual carefully.
RESTRICTIONS, PRECAUTIONS & NOTICE
1. Use the reagent under a professional technician’s guidance.
2. Make sure that the reagent matches with your analyzer. Any
mismatch will lead to misleading results.
3. Avoid contacting with skin and eyes. In case of contact,
rinse immediately with plenty of water and seek medical
advice.
4. Avoid inhaling the evaporated reagent.
5. Tight up the container’s cap to prevent from volatilization
and contamination.
6. Once opened, dispose the remains over 60 days.
7. Avoid product freezing.
